x
Storage, Freight, Maintenance, and
Cleaning
Storage
When not in use, pack the device properly and store in a suitable environment.
Freight
Pack the device carefully before moving it. If any of the original packing material is missing,
use suitable alternative material and mark it “fragile” and “keep away from water” to avoid
damaging the product. This product is a piece of precision test equipment; do not drop or hit it.
Maintenance
In case of any malfunction or abnormality, refer to the manual, or contact your local distributor
for prompt service. Do not touch any parts inside the instrument to avoid any danger to
yourself or damage to the product.
The device requires periodical maintenance and calibration to ensure it meets the product
specifications. The suggested calibration period is 12 months.
Cleaning
Be sure to unplug the input power cord from the device and remove all other connected wires
before cleaning. Use a brush to clean the dust off the machine surface. If the stain on the
chassis is unable to be cleaned by a brush, use volatile liquids such as cleaning naphtha to
wipe the chassis. Do not use corrosive liquid to avoid damaging the chassis. A low pressure
air gun is required to clean the dust inside the device or you can send it to your local
distributor for cleaning.
To Next Page
Loading...
Need help?
General
