Chroma 11210 - System Options Configuration

Setting for Operation
5-3
5.2 System Options
1. Press System Options on main menu to enter System Setup screen as the figure below
shows.
2. Description for system setup as below shows:
(1) System Setup:
System parameter operation setup doesn’t contain test status parameter. For detail
description, see section 5.2.1.
(2) User Password:
It is for setting user password. For detail description, see section 5.2.2.
(3) Memory Management:
It is for managing memory. For detail description, see section 5.2.3.
(4) Interface Setup:
It is for setting interface. For detail description, see section 5.2.4.
(5) Self Test Result:
It is the function for self-test. For detail description, see section 5.2.5.