Chroma 11210 - LC Null for PD Analyzer; Contact Check for PD Analyzer

Battery Cell Insulation Tester 11210 User’s Manual
7-2
1. In BDV function, it does not support PD analysis mode when Vend
CONT is enabled.
2. Troubleshooting: When the following warning window appears,
please turn off the Vend CONT function.
7.2 LC Null
LC Null is used to eliminate the offset function on overall circuit for leakage current ranges
during open circuit. See section 5.3.4 for detailed description.
7.3 Contact Check
See section 5.3.5 for setting contact check.
CAUTION