A112101 PD Analyzer Function Card (Option)
7.6 PD Analyzer Result Display
7.6.1 Operating PD Analyzer
Operating example:
Measuring LC for example, the measurement and setting steps are as follows:
(1) Set the test condition (LC/IR): Select [Edit Condition] in the menu to set the test
parameters (see section 5.3.2).
(2) Return to the main menu to perform the settings of LC Null (see section 5.3.4.1),
Contact Check (see section 5.3.5), IR/LC Compare (see section 5.3.7), PD Compare
(see section 6.4.2), and PD Analyzer (see section 7.4.3) according to the actual
requirements.
To Next Page
Loading...
