Setting for Operation
5-31
Parameter: Measurement parameter has two selections of Leakage Current (LC) and
Insulation Resistance (IR). The factory default value is LC when shipped.
Upper Limit: It sets the upper limit value of compare via touching scroll wheel button. The
scroll wheel button turns into green that indicates judgment function enabled and
gray indicates judgment function disabled.
Lower Limit: It sets the lower limit value of compare via touching scroll wheel button. The
scroll wheel button turns into green that indicates judgment function enabled and
gray indicates judgment function disabled.
It does not support PD Test judgment function and does not insert PD
Tester Card.
It does not support PD Analyzer judgment function and does not insert
PD Analyzer Card.
To Next Page
Loading...
