Cisco 2100 Series - Page 785

Index
IN-19
Cisco Wireless LAN Controller Configuration Guide
OL-17037-01
using the CLI 7-52
using the GUI 7-51
multiple country support, using the configuration
wizard
4-5
N
NAC in-band mode 6-55
NAC out-of-band integration
and hybrid REAP
13-5
configuring
using the CLI
6-60 to 6-61
using the GUI 6-57 to 6-60
described 6-55 to 6-56
diagram 6-56
guidelines 6-56 to 6-57
NAC out-of-band support
configuring for a specific access point group
using the CLI
6-61
using the GUI 6-59
NAC State parameter 6-46, 6-59, 6-60
NAT devices in mobility groups 12-8 to 12-9
Native VLAN ID parameter 13-13
neighbor information
viewing for an access point using the CLI
8-47
viewing for an access point using the GUI 8-44 to 8-47
Neighbor Information option 8-44
Neighbor Packet Frequency parameter 11-19
neighbor statistics
viewing for an access point using the CLI
8-47
viewing for an access point using the GUI 8-44 to 8-47
Netbios Name Servers parameter 6-12
Netmask parameter 6-12
network analyzer supported software
AirMagnet
D-39
Airopeek D-39
Omnipeek D-39
Wireshark D-39
Network Mobility Services Protocol (NMSP) 4-80
active connections 4-88
modifying the notification interval for clients, RFID
tags, and rogues
4-85
viewing counters 4-88
Network parameter 6-12
notes xxv
NTP server
configuring to obtain time and date
4-10
setting in the configuration wizard 4-6
Number of Hits parameter 5-58
O
online help, using 2-2
open source terms C-8
OpenSSL license issues C-6 to C-8
operating system
security
1-5
software 1-4
organization of document xxiv to xxv
Override Global Config parameter 10-21, 10-28
Over-ride Global Credentials parameter 7-7, 7-11, 7-12
Override Interface ACL parameter 5-62
oversized access point images 7-33
over-the-air provisioning (OTAP) 7-3
P
P2P Blocking parameter 6-19
Params parameter 7-19
password
restoring
4-24
password guidelines 7-11
Password parameter
for access point authentication
7-11
for access points 7-7
for local net users 5-31, 13-10
for PACs 9-19
passwords