53-7
Cisco ASA 5500 Series Configuration Guide using ASDM
OL-20339-01
Chapter 53 Managing SSMs and SSCs
Where to Go Next
Where to Go Next
To configure the AIP SSM or SSC, see Chapter 54, “Configuring the IPS Application on the
AIP SSM and SSC.”
To configure the CSC SSM, see Chapter 55, “Configuring the Content Security and Control Application
on the CSC SSM.”
Feature History for the SSM and SSC
Table 53-2 lists each feature change and the platform release in which it was implemented. ASDM is
backwards-compatible with multiple platform releases, so the specific ASDM release in which support
was added is not listed.
Table 53-2 Feature History for the SSM and SSC
Feature Name
Platform
Releases Feature Information
SSM ASA 7.0(1) SSMs were introduced to support multiple applications.
Password reset ASA 7.2(2) The Tools > IPS/CSC Password Reset screen was introduced.
SSC ASA 8.2(1) The SSC was introduced for the ASA 5505.
The Configuration > Device Setup > SSC Setup screen was introduced.
To Next Page
Loading...
Need help?
General
