ASR 5000 Installation Guide ▄
Chapter 6
Cabling the Switch Processor Input/Output Line Card
This chapter provides information on the Switch Processor Input/Output (SPIO) line card interfaces and instructions for
installing the cables.
This chapter includes the following sections:
SPIO Interfaces
Connecting to the Management LAN
Connecting to the Serial Console Port
Connecting to the CO Alarm Interface
Important: Class 1 Laser Compliance Notice Because of the SFP interfaces, this product has been tested and
found to comply with the limits for Class 1 laser devices for IEC825, EN60825, and 21CFR1040 specifications.
To Next Page
Loading...
