Cabling the Switch Processor Input/Output Line Card
▀ Connecting to the Management LAN
▄ ASR 5000 Installation Guide
Each of these interfaces is equipped with two light emitting diode (LED) status indicators:
Link: This green LED shows whether or not the line card is connected to the network. The LED is illuminated
when the card is connected.
Activity: This green LED shows when data is transmitted or received. The LED is illuminated when data is
passing through the interface.
To use the RJ-45 interfaces, simply plug the Ethernet cable into either the Ethernet 1 or Ethernet 2 interface.
To Next Page
Loading...
