Cisco Catalyst 3120

2-109
Cisco Catalyst Blade Switch 3120 for HP Command Reference
OL-12248-01
Chapter 2 Cisco Catalyst Blade Switch 3120 for HP Cisco IOS Commands
dot1x mac-auth-bypass
Examples This example shows how to enable MAC authentication bypass and to configure the switch to use EAP
for authentication:
Switch(config-if)# dot1x mac-auth-bypass eap
You can verify your settings by entering the show dot1x [interface interface-id] privileged EXEC
command.
Related Commands Command Description
show dot1x [interface
interface-id]
Displays IEEE 802.1x status for the specified port.