Cisco Catalyst 3120 Command Reference Guide

2-58
Cisco Catalyst Blade Switch 3120 for HP Command Reference
OL-12248-01
Chapter 2 Cisco Catalyst Blade Switch 3120 for HP Cisco IOS Commands
clear logging
clear logging
Use the clear logging privileged EXEC command on the switch stack or on a standalone switch to clear
all of the on-board failure logging (OBFL) data except for the uptime and CLI-command information
stored in the flash memory.
clear logging onboard
Syntax Description This command has no arguments or keywords.
Defaults No default is defined.
Command Modes Privileged EXEC
Command History
Usage Guidelines We recommend that you keep OBFL enabled and do not erase the data stored in the flash memory.
Examples This example shows how to clear all the OBFL information except for the uptime and CLI-command
information:
Switch# clear logging onboard
Clear logging onboard buffer [confirm]
You can verify that the information was deleted by entering the show logging onboard privileged EXEC
command.
Related Commands
Release Modification
12.2(40)EX This command was introduced.
Command Description
hw-module module [switch-number] logging onboard Enables OBFL.
show logging onboard Displays OBFL information.

Cisco Catalyst 3120 Specifications

General

Brand	Cisco
Model	Catalyst 3120
Category	Switch
Language	English