2-385
Cisco Catalyst Blade Switch 3120 for HP Command Reference
OL-12248-01
Chapter 2 Cisco Catalyst Blade Switch 3120 for HP Cisco IOS Commands
show archive status
show archive status
Use the show archive status privileged EXEC command to display the status of a new image being
downloaded to a switch with the HTTP or the TFTP protocol.
show archive status [ | {begin | exclude | include} expression]
Syntax Description
Command Modes Privileged EXEC
Command History
Usage Guidelines If you use the archive download-sw privileged EXEC command to download an image to a TFTP server,
the output of the archive download-sw command shows the status of the download.
If you do not have a TFTP server, you can use Network Assistant or the embedded device manager to
download the image by using HTTP. The show archive status command shows the progress of the
download.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
are not displayed, but the lines that contain Output are displayed.
Examples These are examples of output from the show archive status command:
Switch# show archive status
IDLE: No upgrade in progress
Switch# show archive status
LOADING: Upgrade in progress
Switch# show archive status
EXTRACT: Extracting the image
Switch# show archive status
VERIFY: Verifying software
Switch# show archive status
RELOAD: Upgrade completed. Reload pending
| begin (Optional) Display begins with the line that matches the expression.
| exclude (Optional) Display excludes lines that match the expression.
| include (Optional) Display includes lines that match the specified expression.
expression Expression in the output to use as a reference point.
Release Modification
12.2(40)EX This command was introduced.
To Next Page
Loading...
Need help?
General