C-18
Cisco Catalyst Blade Switch 3120 for HP Command Reference
OL-12248-01
Appendix C Cisco Catalyst Blade Switch 3120 for HP Show Platform Commands
show platform ipc trace
show platform ipc trace
Use the show platform ipc trace privileged EXEC command to display platform-dependent
Interprocess Communication (IPC) Protocol trace log information.
show platform ipc trace [ | {begin | exclude | include} expression]
Syntax Description
Command Modes Privileged EXEC
Command History
Usage Guidelines You should use this command only when you are working directly with a technical support representative
while troubleshooting a problem. Do not use this command unless a technical support representative asks
you to do so.
Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
| begin (Optional) Display begins with the line that matches the expression.
| exclude (Optional) Display excludes lines that match the expression.
| include (Optional) Display includes lines that match the specified expression.
expression Expression in the output to use as a reference point.
Release Modification
12.2(40)EX This command was introduced.
To Next Page
Loading...
Need help?
General