Cisco Catalyst 3120 Command Reference Guide

2-29
Cisco Catalyst Blade Switch 3120 for HP Command Reference
OL-12248-01
Chapter 2 Cisco Catalyst Blade Switch 3120 for HP Cisco IOS Commands
boot boothlpr
boot boothlpr
Use the boot boothlpr global configuration command on the switch stack or on a standalone switch to
load a special Cisco IOS image, which when loaded into memory, can load a second Cisco IOS image
into memory and start it. This variable is used only for internal development and testing. Use the no form
of this command to return to the default setting.
boot boothlpr filesystem:/file-url
no boot boothlpr
Syntax Description
Defaults No helper image is loaded.
Command Modes Global configuration
Command History
Usage Guidelines Filenames and directory names are case sensitive.
This command changes the setting of the BOOTHLPR environment variable. For more information, see
Appendix A, “Cisco Catalyst Blade Switch 3120 for HP Boot Loader Commands.”
Related Commands
filesystem: Alias for a flash file system. Use flash: for the system board flash device.
/file-url The path (directory) and name of a bootable helper image.
Release Modification
12.2(40)EX This command was introduced.
Command Description
show boot Displays the settings of the boot environment variables.

Cisco Catalyst 3120 Specifications

General

Brand	Cisco
Model	Catalyst 3120
Category	Switch
Language	English