Cisco Catalyst 3120 Command Reference Guide

A-9
Cisco Catalyst Blade Switch 3120 for HP Command Reference
OL-12248-01
Appendix A Cisco Catalyst Blade Switch 3120 for HP Boot Loader Commands
flash_init
flash_init
Use the flash_init boot loader command to initialize the flash file system.
flash_init
Syntax Description This command has no arguments or keywords.
Defaults The flash file system is automatically initialized during normal system operation.
Command Modes Boot loader
Command History
Usage Guidelines During the normal boot process, the flash file system is automatically initialized.
Use this command to manually initialize the flash file system. For example, you use this command
during the recovery procedure for a lost or forgotten password.
Release Modification
12.2(40)EX This command was introduced.

Cisco Catalyst 3120 Specifications

General

Brand	Cisco
Model	Catalyst 3120
Category	Switch
Language	English