2-67
Cisco Catalyst Blade Switch 3120 for HP Command Reference
OL-12248-01
Chapter 2 Cisco Catalyst Blade Switch 3120 for HP Cisco IOS Commands
clear vtp counters
clear vtp counters
Use the clear vtp counters privileged EXEC command on the switch stack or on a standalone switch to
clear the VLAN Trunking Protocol (VTP) and pruning counters.
clear vtp counters
Syntax Description This command has no arguments or keywords.
Defaults No default is defined.
Command Modes Privileged EXEC
Command History
Examples This example shows how to clear the VTP counters:
Switch# clear vtp counters
You can verify that information was deleted by entering the show vtp counters privileged EXEC
command.
Related Commands
Release Modification
12.2(40)EX This command was introduced.
Command Description
show vtp Displays general information about the VTP management domain, status,
and counters.