Cisco Catalyst 3120 Command Reference Guide

2-681
Cisco Catalyst Blade Switch 3120 for HP Command Reference
OL-12248-01
Chapter 2 Cisco Catalyst Blade Switch 3120 for HP Cisco IOS Commands
switch priority
switch priority
Use the switch priority global configuration command on the stack master to change the stack member
priority value.
switch stack-member-number priority new-priority-value
Syntax Description
Defaults The default priority value is 1.
Command Modes Global configuration
Command History
Usage Guidelines The new priority value is a factor during a stack-master re-election. Therefore, changing the priority
value does not change the stack master immediately.
Examples This example shows how to change the priority value of stack member 6 to 9:
Switch(config)# switch 6 priority 9
Changing the Switch Priority of Switch Number 6 to 9
Do you want to continue?[confirm]
Related Commands
stack-member-number Specify the current stack member number. The range is 1 to 9.
priority new-priority-value Specify the new stack member priority value. The range is 1 to 15.
Release Modification
12.2(40)EX This command was introduced.
Command Description
reload Reloads the stack member and puts a configuration change into effect.
session Accesses a specific stack member.
switch renumber Changes the stack member number.
show switch Displays information about the switch stack and its stack members.

Cisco Catalyst 3120 Specifications

General

Brand	Cisco
Model	Catalyst 3120
Category	Switch
Language	English