2-759
Cisco Catalyst Blade Switch 3120 for HP Command Reference
OL-12248-01
Chapter 2 Cisco Catalyst Blade Switch 3120 for HP Cisco IOS Commands
vmps reconfirm (global configuration)
vmps reconfirm (global configuration)
Use the vmps reconfirm global configuration command on the switch stack or on a standalone switch
to change the reconfirmation interval for the VLAN Query Protocol (VQP) client. Use the no form of
this command to return to the default setting.
vmps reconfirm interval
no vmps reconfirm
Syntax Description
Defaults The default reconfirmation interval is 60 minutes.
Command Modes Global configuration
Command History
Examples This example shows how to set the VQP client to reconfirm dynamic VLAN entries every 20 minutes:
Switch(config)# vmps reconfirm 20
You can verify your setting by entering the show vmps privileged EXEC command and examining
information in the Reconfirm Interval row.
Related Commands
interval Reconfirmation interval for VQP client queries to the VLAN Membership Policy
Server (VMPS) to reconfirm dynamic VLAN assignments. The range is 1 to 120
minutes.
Release Modification
12.2(40)EX This command was introduced.
Command Description
show vmps Displays VQP and VMPS information.
vmps reconfirm (privileged EXEC) Sends VQP queries to reconfirm all dynamic VLAN
assignments with the VMPS.
To Next Page
Loading...
Need help?
General