Cisco Catalyst 3120 Command Reference Guide

B-28
Cisco Catalyst Blade Switch 3120 for HP Command Reference
OL-12248-01
Appendix B Cisco Catalyst Blade Switch 3120 for HP Debug Commands
debug platform cpu-queues
debug platform cpu-queues
Use the debug platform cpu-queues privileged EXEC command to enable debugging of platform
central processing unit (CPU) receive queues. Use the no form of this command to disable debugging.
debug platform cpu-queues {broadcast-q | cbt-to-spt-q | cpuhub-q | host-q | icmp-q |
igmp-snooping-q | layer2-protocol-q | logging-q | remote-console-q | routing-protocol-q |
rpffail-q | software-fwd-q | stp-q}
no debug platform cpu-queues {broadcast-q | cbt-to-spt-q | cpuhub-q | host-q | icmp-q |
igmp-snooping-q | layer2-protocol-q | logging-q | remote-console-q | routing-protocol-q |
rpffail-q | software-fwd-q | stp-q}
Syntax Description
Defaults Debugging is disabled.
Command Modes Privileged EXEC
Command History
broadcast-q Display debug messages about packets received by the broadcast queue.
cbt-to-spt-q Display debug messages about packets received by the core-based tree to
shortest-path tree (cbt-to-spt) queue.
cpuhub-q Display debug messages about packets received by the CPU heartbeat queue.
host-q Display debug messages about packets received by the host queue.
icmp-q Display debug messages about packets received by the Internet Control Message
Protocol (ICMP) queue.
igmp-snooping-q Display debug messages about packets received by the Internet Group
Management Protocol (IGMP)-snooping queue.
layer2-protocol-q Display debug messages about packets received by the Layer 2 protocol queue.
logging-q Display debug messages about packets received by the logging queue.
remote-console-q Display debug messages about packets received by the remote console queue.
routing-protocol-q Display debug messages about packets received by the routing protocol queue.
rpffail-q Display debug messages about packets received by the reverse path forwarding
(RFP) failure queue.
software-fwd-q Debug packets received by the software forwarding queue.
stp-q Debug packets received by the Spanning Tree Protocol (STP) queue.
Release Modification
12.2(40)EX This command was introduced.

Cisco Catalyst 3120 Specifications

General

Brand	Cisco
Model	Catalyst 3120
Category	Switch
Language	English