2-473
Cisco Catalyst Blade Switch 3120 for HP Command Reference
OL-12248-01
Chapter 2 Cisco Catalyst Blade Switch 3120 for HP Cisco IOS Commands
show ip igmp profile
show ip igmp profile
Use the show ip igmp profile privileged EXEC command to display all configured Internet Group
Management Protocol (IGMP) profiles or a specified IGMP profile.
show ip igmp profile [profile number] [ | {begin | exclude | include} expression]
Syntax Description
Command Modes Privileged EXEC
Command History
Usage Guidelines Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
are not displayed, but the lines that contain Output are displayed.
Examples These are examples of output from the show ip igmp profile privileged EXEC command, with and
without specifying a profile number. If no profile number is entered, the display includes all profiles
configured on the switch.
Switch# show ip igmp profile 40
IGMP Profile 40
permit
range 233.1.1.1 233.255.255.255
Switch# show ip igmp profile
IGMP Profile 3
range 230.9.9.0 230.9.9.0
IGMP Profile 4
permit
range 229.9.9.0 229.255.255.255
Related Commands
profile number (Optional) The IGMP profile number to be displayed. The range is 1 to
4294967295. If no profile number is entered, all IGMP profiles are displayed.
| begin (Optional) Display begins with the line that matches the expression.
| exclude (Optional) Display excludes lines that match the expression.
| include (Optional) Display includes lines that match the specified expression.
expression Expression in the output to use as a reference point.
Release Modification
12.2(40)EX This command was introduced.
Command Description
ip igmp profile Configures the specified IGMP profile number.
To Next Page
Loading...
Need help?
General