2-127
Cisco Catalyst Blade Switch 3120 for HP Command Reference
OL-12248-01
Chapter 2 Cisco Catalyst Blade Switch 3120 for HP Cisco IOS Commands
exception crashinfo
exception crashinfo
Use the exception crashinfo global configuration command on the switch stack or on a standalone
switch to configure the switch to create the extended crashinfo file when the Cisco IOS image fails. Use
the no form of this command to disable this feature.
exception crashinfo
no exception crashinfo
Syntax Description This command has no arguments or keywords.
Defaults The switch creates the extended crashinfo file.
Command Modes Global configuration
Command History
Usage Guidelines The basic crashinfo file includes the Cisco IOS image name and version that failed, and a list of the
processor registers, and a stack trace. The extended crashinfo file includes additional information that
can help determine the cause of the switch failure.
If you enter the exception crashinfo global configuration command on a stack master, it configures all
the stack members to create the extended crashinfo file if the Cisco IOS image on the stack members fail.
Use the no exception crashinfo global configuration command to configure the switch to not create the
extended crashinfo file.
Examples This example shows how to configure the switch to not create the extended crashinfo file:
Switch(config)# no exception crashinfo
You can verify your settings by entering the show running-config privileged EXEC command.
Related Commands
Release Modification
12.2(40)EX This command was introduced.
Command Description
show running-config Displays the operating configuration. For syntax information, use
this link to the Cisco IOS Release 12.2 Command Reference listing
page:
http://www.cisco.com/en/US/products/sw/iosswrel/ps1835/prod_
command_reference_list.html
Select the Cisco IOS Commands Master List, Release 12.2 to
navigate to the command.
To Next Page
Loading...
Need help?
General