Cisco Catalyst 3120 Command Reference Guide

2-586
Cisco Catalyst Blade Switch 3120 for HP Command Reference
OL-12248-01
Chapter 2 Cisco Catalyst Blade Switch 3120 for HP Cisco IOS Commands
show switch
show switch
Use the show switch user EXEC command to display information related to the stack member or the
switch stack.
show switch [stack-member-number | chassis-mgmt | detail | neighbors | stack-ports | stack-ring
activity [detail]] [ | {begin | exclude | include} expression]
Syntax Description
Command Modes User EXEC
Command History
Usage Guidelines Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
These are the states displayed from this command:
• Waiting—The state when a switch is booting up and waiting for communication from other switches
in the stack. The switch has not yet determined whether it is a stack master or not.
Stack members not participating in a stack master election remain in the waiting state until the stack
master is elected and ready.
• Initializing—The state when a switch has determined whether it is the stack master or not. If the
switch is not the stack master, it is receiving its system- and interface-level configuration from the
stack master and loading it.
• Ready—The state when the stack member has completed loading the system- and interface-level
configuration and is ready to forward traffic.
stack-member-number (Optional) Display information for the specified stack member. The range
is 1 to 9.
chassis-mgmt (Optional) Display information about the enclosures in which the stack
members are installed.
detail (Optional) Display detailed information about the stack ring.
neighbors (Optional) Display the neighbors for the entire switch stack.
stack-ports (Optional) Display port information for the entire switch stack.
stack-ring activity
[detail]
(Optional) Display the number of frames per stack member that are sent to
the stack ring. Use the detail keyword to display the ASIC, the receive
queues, and the number of frames per stack member that are sent to the
stack ring.
| begin (Optional) Display begins with the line that matches the expression.
| exclude (Optional) Display excludes lines that match the expression.
| include (Optional) Display includes lines that match the specified expression.
expression Expression in the output to use as a reference point.
Release Modification
12.2(40)EX This command was introduced.

Cisco Catalyst 3120 Specifications

General

Brand	Cisco
Model	Catalyst 3120
Category	Switch
Language	English