Cisco Catalyst 3120 Command Reference Guide

2-392
Cisco Catalyst Blade Switch 3120 for HP Command Reference
OL-12248-01
Chapter 2 Cisco Catalyst Blade Switch 3120 for HP Cisco IOS Commands
show boot
show boot
Use the show boot privileged EXEC command to display the settings of the boot environment variables.
show boot [ | {begin | exclude | include} expression]
Syntax Description
Command Modes Privileged EXEC
Command History
Usage Guidelines Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
are not displayed, but the lines that contain Output are displayed.
Examples This is an example of output from the show boot command for all stack members. Table 2-17 describes
each field in the display.
Switch# show boot
BOOT path-list : flash:cbs31x0-universal-mz
Config file : flash:/config.text
Private Config file : flash:/private-config.text
Enable Break : no
Manual Boot : yes
HELPER path-list :
Auto upgrade : yes
Auto upgrade path :
-------------------
Switch 2
-------------------
BOOT path-list : flash:cbs31x0-universal-mz
Config file : flash:/config.text
Private Config file : flash:/private-config.text
Enable Break : no
Manual Boot : yes
HELPER path-list :
Auto upgrade : no
Auto upgrade path :
-------------------
<output truncated>
| begin (Optional) Display begins with the line that matches the expression.
| exclude (Optional) Display excludes lines that match the expression.
| include (Optional) Display includes lines that match the specified expression.
expression Expression in the output to use as a reference point.
Release Modification
12.2(40)EX This command was introduced.

Cisco Catalyst 3120 Specifications

General

Brand	Cisco
Model	Catalyst 3120
Category	Switch
Language	English