Cisco Catalyst 3120 Command Reference Guide

2-487
Cisco Catalyst Blade Switch 3120 for HP Command Reference
OL-12248-01
Chapter 2 Cisco Catalyst Blade Switch 3120 for HP Cisco IOS Commands
show ipc
show ipc
Use the show ipc user EXEC command to display Interprocess Communications Protocol (IPC)
configuration, status, and statistics on a switch stack or a standalone switch.
show ipc {mcast {appclass | groups | status} | nodes | ports [open] | queue | rpc | session {all |
rx | tx} [verbose] | status [cumlulative] | zones} [ | {begin | exclude | include} expression]
Syntax Description
Command Modes User EXEC
Command History
mcast {appclass |
groups | status}
Display the IPC multicast routing information. The keywords have these
meanings:
• appclass—Display the IPC multicast application classes.
• groups—Display the IPC multicast groups.
• status—Display the IPC multicast routing status.
nodes Display participating nodes.
ports [open] Display local IPC ports. The keyword has this meaning:
• open—(Optional) Display only the open ports.
queue Display the contents of the IPC transmission queue.
rpc Display the IPC remote-procedure statistics.
session {all | rx | tx} Display the IPC session statistics (available only in privileged EXEC mode).
The keywords have these meanings:
• all—Display all the session statistics.
• rx—Display the sessions statistics for traffic that the switch receives
• tx—Display the sessions statistics for traffic that the switch forwards.
verbose (Optional) Display detailed statistics (available only in privileged EXEC
mode).
status [cumlulative] Display the status of the local IPC server. The keyword has this meaning:
• cumlulative—(Optional) Display the status of the local IPC server since
the switch was started or restarted.
zones Display the participating IPC zones. The switch supports a single IPC zone.
| begin (Optional) Display begins with the line that matches the expression.
| exclude (Optional) Display excludes lines that match the expression.
| include (Optional) Display includes lines that match the specified expression.
expression Expression in the output to use as a reference point.
Release Modification
12.2(40)EX This command was introduced.

Cisco Catalyst 3120 Specifications

General

Brand	Cisco
Model	Catalyst 3120
Category	Switch
Language	English