Cisco Catalyst 3120 Command Reference Guide

2-261
Cisco Catalyst Blade Switch 3120 for HP Command Reference
OL-12248-01
Chapter 2 Cisco Catalyst Blade Switch 3120 for HP Cisco IOS Commands
macro name
macro name
Use the macro name global configuration command on the switch stack or on a standalone switch to
create a configuration macro. Use the no form of this command to delete the macro definition.
macro name macro-name
no macro name macro-name
Syntax Description
Defaults This command has no default setting.
Command Modes Global configuration
Command History
Usage Guidelines A macro can contain up to 3000 characters. Enter one macro command per line. Use the @ character to
end the macro. Use the # character at the beginning of a line to enter comment text within the macro.
You can define mandatory keywords within a macro by using a help string to specify the keywords. Enter
# macro keywords word to define the keywords that are available for use with the macro. You can enter
up to three help string keywords separated by a space. If you enter more than three macro keywords, only
the first three are shown.
Macro names are case sensitive. For example, the commands macro name Sample-Macro and macro
name sample-macro will result in two separate macros.
When creating a macro, do not use the exit or end commands or change the command mode by using
interface interface-id. This could cause commands that follow exit, end, or interface interface-id to
execute in a different command mode.
macro-name Name of the macro.
Release Modification
12.2(40)EX This command was introduced.

Cisco Catalyst 3120 Specifications

General

Brand	Cisco
Model	Catalyst 3120
Category	Switch
Language	English