Cisco Catalyst 3120 Command Reference Guide

A-13
Cisco Catalyst Blade Switch 3120 for HP Command Reference
OL-12248-01
Appendix A Cisco Catalyst Blade Switch 3120 for HP Boot Loader Commands
memory
memory
Use the memory boot loader command to display memory heap utilization information.
memory
Syntax Description This command has no arguments or keywords.
Command Modes Boot loader
Command History
Examples This example shows how to display memory heap utilization information:
switch: memory
Text: 0x00700000 - 0x0071cf24 (0x0001cf24 bytes)
Rotext: 0x00000000 - 0x00000000 (0x00000000 bytes)
Data: 0x0071cf24 - 0x00723a0c (0x00006ae8 bytes)
Bss: 0x0072529c - 0x00746f94 (0x00021cf8 bytes)
Stack: 0x00746f94 - 0x00756f94 (0x00010000 bytes)
Heap: 0x00756f98 - 0x00800000 (0x000a9068 bytes)
Bottom heap utilization is 22 percent.
Top heap utilization is 0 percent.
Total heap utilization is 22 percent.
Total bytes: 0xa9068 (692328)
Bytes used: 0x26888 (157832)
Bytes available: 0x827e0 (534496)
Alternate heap utilization is 0 percent.
Total alternate heap bytes: 0x6fd000 (7327744)
Alternate heap bytes used: 0x0 (0)
Alternate heap bytes available: 0x6fd000 (7327744)
Table A-2 describes the fields in the display.
Release Modification
12.2(40)EX This command was introduced.
Table A-2 memory Field Descriptions
Field Description
Text Beginning and ending address of the text storage area.
Rotext Beginning and ending address of the read-only text storage area. This part of the data
segment is grouped with the Text entry.
Data Beginning and ending address of the data segment storage area.
Bss Beginning and ending address of the block started by symbol (Bss) storage area. It
is initialized to zero.

Cisco Catalyst 3120 Specifications

General

Brand	Cisco
Model	Catalyst 3120
Category	Switch
Language	English