Cisco Catalyst 3120

2-18
Cisco Catalyst Blade Switch 3120 for HP Command Reference
OL-12248-01
Chapter 2 Cisco Catalyst Blade Switch 3120 for HP Cisco IOS Commands
archive upload-sw
archive upload-sw
Use the archive upload-sw privileged EXEC command on the switch stack or on a standalone switch to
upload an existing switch image to a server.
archive upload-sw [/source-system-num stack member number | /version version_string]
destination-url
Syntax Description
Defaults Uploads the currently running image from the flash: file system.
Command Modes Privileged EXEC
Command History
/source-system-num
stack member number
Specify the specific stack member containing the image that is to be
uploaded.
/version version_string (Optional) Specify the specific version string of the image to be uploaded.
destination-url The destination URL alias for a local or network file system. The
image-name.tar is the name of software image to be stored on the server.
These options are supported:
• Local flash file system syntax on the standalone switch or the stack
master:
flash:
Local flash file system syntax on a stack member:
flash member number:
• FTP syntax:
ftp:[[//username[:password]@location]/directory]/image-name.tar
• HTTP server syntax:
http://[[username:password]@]{hostname |
host-ip}[/directory]/image-name.tar
• Secure HTTP server syntax:
https://[[username:password]@]{hostname |
host-ip}[/directory]/image-name.tar
• Remote Copy Protocol (RCP) syntax:
rcp:[[//username@location]/directory]/image-name.tar
• TFTP syntax:
tftp:[[//location]/directory]/image-name.tar
Release Modification
12.2(40)EX This command was introduced.