2-175
Cisco Catalyst Blade Switch 3120 for HP Command Reference
OL-12248-01
Chapter 2 Cisco Catalyst Blade Switch 3120 for HP Cisco IOS Commands
ip dhcp snooping vlan
ip dhcp snooping vlan
Use the ip dhcp snooping vlan global configuration command on the switch stack or on a standalone
switch to enable DHCP snooping on a VLAN. Use the no form of this command to return to the default
setting.
ip dhcp snooping vlan vlan-range
no ip dhcp snooping vlan vlan-range
Syntax Description
Defaults DHCP snooping is disabled on all VLANs.
Command Modes Global configuration
Command History
Usage Guidelines You must first globally enable DHCP snooping before enabling DHCP snooping on a VLAN.
Examples This example shows how to enable DHCP snooping on VLAN 10:
Switch(config)# ip dhcp snooping vlan 10
You can verify your settings by entering the show ip dhcp snooping user EXEC command.
Related Commands
vlan vlan-range Specify a VLAN ID or a range of VLANs on which to enable DHCP snooping. The
range is 1 to 4094.
You can enter a single VLAN ID identified by VLAN ID number, a series of VLAN
IDs separated by commas, a range of VLAN IDs separated by hyphens, or a range
of VLAN IDs separated by entering the starting and ending VLAN IDs separated
by a space.
Release Modification
12.2(40)EX This command was introduced.
Command Description
show ip dhcp snooping Displays the DHCP snooping configuration.
show ip dhcp snooping binding Displays the DHCP snooping binding information.
To Next Page
Loading...
Need help?
General