Cisco Catalyst 3120 Command Reference Guide

2-30
Cisco Catalyst Blade Switch 3120 for HP Command Reference
OL-12248-01
Chapter 2 Cisco Catalyst Blade Switch 3120 for HP Cisco IOS Commands
boot config-file
boot config-file
Use the boot config-file global configuration command on a standalone switch to specify the filename
that Cisco IOS uses to read and write a nonvolatile copy of the system configuration. Use the no form
of this command to return to the default setting.
boot config-file flash:/file-url
no boot config-file
Syntax Description
Defaults The default configuration file is flash:config.text.
Command Modes Global configuration
Command History
Usage Guidelines This command works properly only from a standalone switch in a stack.
Filenames and directory names are case sensitive.
This command changes the setting of the CONFIG_FILE environment variable. For more information,
see Appendix A, “Cisco Catalyst Blade Switch 3120 for HP Boot Loader Commands.”
Related Commands
flash:/file-url The path (directory) and name of the configuration file.
Release Modification
12.2(40)EX This command was introduced.
Command Description
show boot Displays the settings of the boot environment variables.

Cisco Catalyst 3120 Specifications

General

Brand	Cisco
Model	Catalyst 3120
Category	Switch
Language	English