Cisco Catalyst 3120 Command Reference Guide

2-601
Cisco Catalyst Blade Switch 3120 for HP Command Reference
OL-12248-01
Chapter 2 Cisco Catalyst Blade Switch 3120 for HP Cisco IOS Commands
show vlan filter
show vlan filter
Use the show vlan filter privileged EXEC command to display information about all VLAN filters or
about a particular VLAN or VLAN access map.
show vlan filter [access-map name | vlan vlan-id] [ | {begin | exclude | include} expression]
Syntax Description
Command Modes Privileged EXEC
Command History
Usage Guidelines Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output
do not appear, but the lines that contain Output appear.
Examples This is an example of output from the show vlan filter command:
Switch# show vlan filter
VLAN Map map_1 is filtering VLANs:
20-22
Related Commands
access-map name (Optional) Display filtering information for the specified VLAN access map.
vlan vlan-id (Optional) Display filtering information for the specified VLAN. The range is
1 to 4094.
| begin (Optional) Display begins with the line that matches the expression.
| exclude (Optional) Display excludes lines that match the expression.
| include (Optional) Display includes lines that match the specified expression.
expression Expression in the output to use as a reference point.
Release Modification
12.2(40)EX This command was introduced.
Command Description
show vlan access-map Displays information about a particular VLAN access map or for all
VLAN access maps.
vlan access-map Creates a VLAN map entry for VLAN packet filtering.
vlan filter Applies a VLAN map to one or more VLANs.

Cisco Catalyst 3120 Specifications

General

Brand	Cisco
Model	Catalyst 3120
Category	Switch
Language	English