Cisco Catalyst 3120 Command Reference Guide

C-19
Cisco Catalyst Blade Switch 3120 for HP Command Reference
OL-12248-01
Appendix C Cisco Catalyst Blade Switch 3120 for HP Show Platform Commands
show platform ipv6 unicast
show platform ipv6 unicast
Use the show platform ipv6 unicast privileged EXEC command to display platform-dependent IPv6
unicast routing information. This command is available only if the switch or switch stack is running the
advanced IP services feature set.
show platform ipv6 unicast {adjacency [ipv6-prefix] | backwalk {adjacency | loadbalance} |
compress ipv6-prefix/prefix length | interface | loadbalance | mpath | retry {adjacency |
route} | route [ipv6-prefix/prefix length | tcam] [detail] | statistics | table [detail] | trace}
[| {begin | exclude | include} expression]
Syntax Description adjacency Display IPv6 adjacency information for the switch or for the specified IPv6
network.
ipv6-prefix (Optional) The IPv6 network to be displayed. This argument must be in the
form documented in RFC 2373 where the address is specified in hexadecimal
using 16-bit values between colons.
backwalk {adjacency
| loadbalance}
Display IPv6 backwalk information.
• adjacency—Display adjacency backwalk information.
• loadbalance—Display backwalk load-balance information.
compress
ipv6-prefix/prefix
length
Display IPv6 prefix compression information.
• ipv6-prefix—The IPv6 network.
• /prefix length—The length of the IPv6 network prefix. A decimal value
from 0 to 128 that shows how many of the high-order contiguous bits of
the address comprise the prefix (the network portion of the address). A
slash mark must precede the decimal value.
interface Display IPv6 interface information.
loadbalance Display IPv6 load-balance information
mpath Display IPv6 multipath information
retry {adjacency |
route}
Display IPv6 retry information.
• adjacency—Display IPv6 adjacency retry information.
• route—Display IPv6 route retry information.
route Display IPv6 route information.
tcam (Optional) Display the IPv6 hardware route table information.
detail (Optional) Display detailed IPv6 route information.
statistics Display IPv6 accumulated statistics.
table Display IPv6 unicast table information.
trace Display IPv6 unicast traces.
| begin (Optional) Display begins with the line that matches the expression.
| exclude (Optional) Display excludes lines that match the expression.
| include (Optional) Display includes lines that match the specified expression.
expression Expression in the output to use as a reference point.

Cisco Catalyst 3120 Specifications

General

Brand	Cisco
Model	Catalyst 3120
Category	Switch
Language	English