Cisco Catalyst 3120 Command Reference Guide

2-238
Cisco Catalyst Blade Switch 3120 for HP Command Reference
OL-12248-01
Chapter 2 Cisco Catalyst Blade Switch 3120 for HP Cisco IOS Commands
location (interface configuration)
This example shows how to enter emergency location information for an interface:
Switch(config)# interface gigabitethernet2/0/2
Switch(config-if)# location elin-location-id 1
Switch(config-if)# end
You can verify your settings by entering the show location elin interface privileged EXEC command.
Related Commands Command Description
location (global configuration) Configures the location information for an endpoint.
show location Displays the location information for an endpoint.

Cisco Catalyst 3120 Specifications

General

Brand	Cisco
Model	Catalyst 3120
Category	Switch
Language	English