Cisco Catalyst 3120

2-249
Cisco Catalyst Blade Switch 3120 for HP Command Reference
OL-12248-01
Chapter 2 Cisco Catalyst Blade Switch 3120 for HP Cisco IOS Commands
mac address-table notification
Examples This example shows how to enable the MAC address-table notification feature, set the interval time to
60 seconds, and set the history-size to 100 entries:
Switch(config)# mac address-table notification
Switch(config)# mac address-table notification interval 60
Switch(config)# mac address-table notification history-size 100
You can verify your settings by entering the show mac address-table notification privileged EXEC
command.
Related Commands Command Description
clear mac address-table notification Clears the MAC address notification global counters.
show mac address-table notification Displays the MAC address notification settings on all
interfaces or on the specified interface.
snmp-server enable traps Sends the SNMP MAC notification traps when the
mac-notification keyword is appended.
snmp trap mac-notification Enables the SNMP MAC notification trap on a specific
interface.