Cisco Catalyst 3120

2-10
Cisco Catalyst Blade Switch 3120 for HP Command Reference
OL-12248-01
Chapter 2 Cisco Catalyst Blade Switch 3120 for HP Cisco IOS Commands
archive copy-sw
Examples This example shows how to copy the running image from stack member 6 to stack member 8:
Switch# archive copy-sw /destination-system 8 6
This example shows how to copy the running image from stack member 6 to all the other stack members:
Switch# archive copy-sw 6
This example shows how to copy the running image from stack member 5 to stack member 7. If the
image being copied already exists on the second stack member’s flash memory, it can be overwritten
with the copied one. The system reloads after the image is copied:
Switch# archive copy-sw /destination-system 7 /overwrite /force-reload 5
Related Commands Command Description
archive download-sw Downloads a new image from a TFTP server to the switch.
archive tar Creates a tar file, lists the files in a tar file, or extracts the files from a tar file.
archive upload-sw Uploads an existing image on the switch to a server.
delete Deletes a file or directory on the flash memory device.