Cisco Catalyst 3120 Command Reference Guide

2-464
Cisco Catalyst Blade Switch 3120 for HP Command Reference
OL-12248-01
Chapter 2 Cisco Catalyst Blade Switch 3120 for HP Cisco IOS Commands
show ip arp inspection
This is an example of output from the show ip arp inspection vlan 5 command. It shows the
configuration and the operating state of dynamic ARP inspection for VLAN 5.
Switch# show ip arp inspection vlan 5
Source Mac Validation :Enabled
Destination Mac Validation :Enabled
IP Address Validation :Enabled
Vlan Configuration Operation ACL Match Static ACL
---- ------------- --------- --------- ----------
5 Enabled Active second No
Vlan ACL Logging DHCP Logging
---- ----------- ------------
5 Acl-Match All
Related Commands Command Description
arp access-list Defines an ARP ACL.
clear ip arp inspection log Clears the dynamic ARP inspection log buffer.
clear ip arp inspection statistics Clears the dynamic ARP inspection statistics.
ip arp inspection log-buffer Configures the dynamic ARP inspection logging buffer.
ip arp inspection vlan logging Controls the type of packets that are logged per VLAN.
show arp access-list Displays detailed information about ARP access lists.

Cisco Catalyst 3120 Specifications

General

Brand	Cisco
Model	Catalyst 3120
Category	Switch
Language	English