Cisco Catalyst 3120 Command Reference Guide

2-576
Cisco Catalyst Blade Switch 3120 for HP Command Reference
OL-12248-01
Chapter 2 Cisco Catalyst Blade Switch 3120 for HP Cisco IOS Commands
show sdm prefer
number of IPv4/MAC security aces: 1K
number of IPv6 policy based routing aces: 0
number of IPv6 qos aces: 0.5K
number of IPv6 security aces: 0.5K
This is an example of output from the show sdm prefer vlan command:
Switch# show sdm prefer vlan
"desktop vlan" template:
The selected template optimizes the resources in
the switch to support this level of features for
8 routed interfaces and 1024 VLANs.
number of unicast mac addresses: 12K
number of IPv4 IGMP groups: 1K
number of IPv4 multicast routes: 0
number of IPv4 unicast routes: 0
number of IPv4 policy based routing aces: 0
number of IPv4/MAC qos aces: 0.5K
number of IPv4/MAC security aces: 1K
This is an example of output from the show sdm prefer command when you have configured a new
template but have not reloaded the switch:
Switch# show sdm prefer
The current template is "desktop routing" template.
The selected template optimizes the resources in
the switch to support this level of features for
8 routed interfaces and 1024 VLANs.
number of unicast mac addresses: 3K
number of igmp groups + multicast routes: 1K
number of unicast routes: 11K
number of directly connected hosts: 3K
number of indirect routes: 8K
number of qos aces: 0.5K
number of security aces: 1K
On next reload, template will be "desktop vlan" template.
Related Commands Command Description
sdm prefer Sets the SDM template to maximize resources for routing or VLANs or to the
default template, to select a dual IPv4 and IPv6 template, or to select the
desktop templates.

Cisco Catalyst 3120 Specifications

General

Brand	Cisco
Model	Catalyst 3120
Category	Switch
Language	English