Cisco Catalyst 3120 Command Reference Guide

C-30
Cisco Catalyst Blade Switch 3120 for HP Command Reference
OL-12248-01
Appendix C Cisco Catalyst Blade Switch 3120 for HP Show Platform Commands
show platform port-asic
stack {control | dest-map |
learning | messages | mvid |
prog-parser | span | stats [asic
number | port number [asic
number]]
Display stack-related information. The keywords have these
meanings:
• control—Display stack control-status register information.
• dest-map—Display destination-map information.
• learning—Display entries in the learning-cache.
• messages—Display the stack-message register information.
• mvid—Display entries in the mapped VLAN-ID table.
• prog-parser—Display the programmable parser tables.
• span—Display SPAN-related information.
• stats—Display raw statistics for the port ASIC.
• asic number—(Optional) Display information for the
specified ASIC. The range is 0 to 1.
• port number—(Optional) Display information for the
specified port and ASIC number. The range is 0 to 27, where
0 is the supervisor and 1 to 25 are the ports.
These keywords are available only on Catalyst 3750-E switches.
stats {drop | enqueue |
miscellaneous | supervisor} [asic
number | port number [asic
number]]
Display raw statistics for the port ASIC. The keywords have these
meanings:
• drop—Display drop statistics.
• enqueue—Display enqueue statistics.
• miscellaneous—Display miscellaneous statistics.
• supervisor—Display supervisor statistics.
• asic number—(Optional) Display information for the
specified ASIC. The range is 0 to 1.
• port number—(Optional) Display information for the
specified port and ASIC number. The range is 0 to 27, where
0 is the supervisor and 1 to 25 are the ports.
transmit {port-fifo | queue |
supervisor-sram} [asic number |
port number [asic number]]
Display transmit information. The keywords have these meanings:
• port-fifo—Display the contents of the port-FIFO information
register.
• queue—Display the contents of the queue information
register.
• supervisor-sram—Display supervisor SRAM information.
• asic number—(Optional) Display information for the
specified ASIC. The range is 0 to 1.
• port number—(Optional) Display information for the
specified port and ASIC number. The range is 0 to 27, where 0
is the supervisor and 1 to 25 are the ports.

Cisco Catalyst 3120 Specifications

General

Brand	Cisco
Model	Catalyst 3120
Category	Switch
Language	English