Cisco Catalyst 9500 Series

PurposeCommand or Action
Example:
Device(config)# set ip next-hop
10.1.1.3
•
In an inbound route map, set the next hop of
matching routes to be the neighbor peering
address, overriding third-party next hops.
•
In an outbound route map of a BGP peer, set
the next hop to the peering address of the local
router, disabling the next-hop calculation.
Returns to privileged EXEC mode.end
Example:
Device(config)# end
Step 4
Displays all route maps configured or only the one
specified to verify configuration.
show route-map [map-name]
Example:
Device# show route-map
Step 5
(Optional) Saves your entries in the configuration
file.
copy running-config startup-config
Example:
Device# copy running-config
Step 6
startup-config
Configuring BGP Filtering by Neighbor
Procedure
PurposeCommand or Action
Enters the global configuration mode.configure terminal
Example:
Device# configure terminal
Step 1
Enables a BGP routing process, assign it an AS
number, and enter router configuration mode.
router bgp autonomous-system
Example:
Device(config)# router bgp 109
Step 2
Routing Configuration Guide, Cisco IOS XE Everest 16.6.x (Catalyst 9500 Switches)
132
Configuring IP Unicast Routing
Configuring BGP Filtering by Neighbor