Cisco Catalyst 9500 Series User Manual

PurposeCommand or Action
Returns to privileged EXEC mode.end
Example:
Device(config)# end
Step 12
Displays lists of information related to the OSPF
database for a specific router.
show ip ospf [process-id [area-id]] database
Example:
Device# show ip ospf database
Step 13
(Optional) Saves your entries in the configuration
file.
copy running-config startup-config
Example:
Device# copy running-config
Step 14
startup-config
Changing LSA Group Pacing
Procedure
PurposeCommand or Action
Enters the global configuration mode.configure terminal
Example:
Device# configure terminal
Step 1
Enables OSPF routing, and enter router
configuration mode.
router ospf process-id
Example:
Device(config)# router ospf 25
Step 2
Changes the group pacing of LSAs.
timers lsa-group-pacing seconds
Example:
Device(config-router)# timers
lsa-group-pacing 15
Step 3
Routing Configuration Guide, Cisco IOS XE Everest 16.6.x (Catalyst 9500 Switches)
101
Configuring IP Unicast Routing
Changing LSA Group Pacing

Cisco Catalyst 9500 Series Specifications

General

Series	Catalyst 9500 Series
Category	Switch
Software	Cisco IOS XE
Operating Temperature	0°C to 45°C (32°F to 113°F)
Storage Temperature	-40°C to 70°C (-40°F to 158°F)
Fixed Uplink Modules	Varies by model
Stacking	Yes (StackWise Virtual)
Redundancy	Redundant power supplies and fans
Security	Advanced security features
PoE+	Available (varies by model)
Power Supply Options	AC and DC options (varies by model)
Relative Humidity	5% to 90% noncondensing
Dimensions (H x W x D)	Varies by model
Weight	Varies by model
Ports	Up to 48 ports (varies by model)