Cisco Catalyst 9500 Series

PurposeCommand or Action
(Optional) Saves your entries in the configuration
file.
copy running-config startup-config
Example:
Device# copy running-config
Step 8
startup-config
Configuring Route Dampening
Procedure
PurposeCommand or Action
Enters the global configuration mode.configure terminal
Example:
Device# configure terminal
Step 1
Enters BGP router configuration mode.
router bgp autonomous-system
Example:
Device(config)# router bgp 100
Step 2
Enables BGP route dampening.bgp dampening
Example:
Device(config-router)# bgp dampening
Step 3
(Optional) Changes the default values of
route dampening factors.
bgp dampening half-life reuse suppress
max-suppress [route-map map]
Example:
Device(config-router)# bgp dampening 30
1500 10000 120
Step 4
Returns to privileged EXEC mode.end
Example:
Device(config)# end
Step 5
Routing Configuration Guide, Cisco IOS XE Everest 16.6.x (Catalyst 9500 Switches)
144
Configuring IP Unicast Routing
Configuring Route Dampening