Cisco Catalyst 9500 Series User Manual

ip vrf forwarding green
ip address 10.1.1.1 255.255.255.0
interface ethernet1
ip vrf forwarding blue
ip address 10.2.2.2 255.255.255.0
ip route vrf blue 10.5.5.5 255.255.255.0 ethernet 1
Additional References
Table 23: Related Documents
Document TitleRelated Topic
"Configuring Multiprotocol Label Switching"
chapter of the Cisco IOS Switching Services
Configuration Guide, Release 12.2
VRF tables
Cisco IOS Interface Configuration Guide, Release
12.2
Tunnels
Table 24: Standards
TitleStandard
--No new or modified standards are supported by this
feature, and support for existing standards has not
been modified by this feature
Table 25: RFCs
TitleRFC
--No new or modified RFCs are supported by this
feature, and support for existing RFCs has not been
modified by this feature.
Table 26: Related DoTechnical Assistancecuments
LinkDescription
http://www.cisco.com/techsupportThe Cisco Technical Support & Documentation
website contains thousands of pages of searchable
technical content, including links to products,
technologies, solutions, technical tips, and tools.
Registered Cisco.com users can log in from this page
to access even more content.
Routing Configuration Guide, Cisco IOS XE Everest 16.6.x (Catalyst 9500 Switches)
208
Configuring Generic Routing Encapsulation(GRE) Tunnel IP Source and Destination VRF Membership
Additional References

Cisco Catalyst 9500 Series Specifications

General

Series	Catalyst 9500 Series
Category	Switch
Software	Cisco IOS XE
Operating Temperature	0°C to 45°C (32°F to 113°F)
Storage Temperature	-40°C to 70°C (-40°F to 158°F)
Fixed Uplink Modules	Varies by model
Stacking	Yes (StackWise Virtual)
Redundancy	Redundant power supplies and fans
Security	Advanced security features
PoE+	Available (varies by model)
Power Supply Options	AC and DC options (varies by model)
Relative Humidity	5% to 90% noncondensing
Dimensions (H x W x D)	Varies by model
Weight	Varies by model
Ports	Up to 48 ports (varies by model)