Cisco Catalyst 9500 Series User Manual

CHAPTER 3
Configuring IP Unicast Routing
•
Information About Configuring IP Unicast Routing, page 52
•
Information About IP Routing, page 52
•
How to Configure IP Routing, page 57
•
How to Configure IP Addressing, page 58
•
Monitoring and Maintaining IP Addressing, page 77
•
How to Configure IP Unicast Routing, page 78
•
Information About RIP, page 80
•
How to Configure RIP, page 81
•
Configuration Example for Summary Addresses and Split Horizon, page 88
•
Information About OSPF, page 89
•
How to Configure OSPF, page 92
•
Monitoring OSPF, page 103
•
Configuration Examples for OSPF, page 104
•
Information About EIGRP, page 104
•
How to Configure EIGRP, page 107
•
Monitoring and Maintaining EIGRP, page 115
•
Information About BGP, page 115
•
How to Configure BGP, page 122
•
Monitoring and Maintaining BGP, page 145
•
IS-IS Routing, page 147
•
How to Configure IS-IS Routing, page 149
•
Monitoring and Maintaining IS-IS, page 158
•
Information About Multi-VRF CE, page 158
•
How to Configure Multi-VRF CE, page 161
Routing Configuration Guide, Cisco IOS XE Everest 16.6.x (Catalyst 9500 Switches)
51

Cisco Catalyst 9500 Series Specifications

General

Series	Catalyst 9500 Series
Category	Switch
Software	Cisco IOS XE
Operating Temperature	0°C to 45°C (32°F to 113°F)
Storage Temperature	-40°C to 70°C (-40°F to 158°F)
Fixed Uplink Modules	Varies by model
Stacking	Yes (StackWise Virtual)
Redundancy	Redundant power supplies and fans
Security	Advanced security features
PoE+	Available (varies by model)
Power Supply Options	AC and DC options (varies by model)
Relative Humidity	5% to 90% noncondensing
Dimensions (H x W x D)	Varies by model
Weight	Varies by model
Ports	Up to 48 ports (varies by model)