Cisco Catalyst 9500 Series

Controlling Source Information that Your Switch Receives: Example
This example shows how to filter all SA messages from the peer named switch.cisco.com:
Device(config)# ip msdp peer switch.cisco.com connect-source gigabitethernet1/0/1
Device(config)# ip msdp sa-filter in switch.cisco.com
Feature Information for Multicast Source Discovery Protocol
Table 4: Feature Information for Multicast Source Discovery Protocol
Feature InformationReleaseFeature Name
This feature was introducedCisco IOS XE Everest 16.5.1aMulticast Source Discovery
Protocol
Routing Configuration Guide, Cisco IOS XE Everest 16.6.x (Catalyst 9500 Switches)
50
Configuring MSDP
Controlling Source Information that Your Switch Receives: Example