PurposeCommand or Action
Uses the spanning-tree database to speed
up flooding of UDP datagrams.
ip forward-protocol turbo-flood
Example:
Device(config)# ip forward-protocol
turbo-flood
Step 8
Returns to privileged EXEC mode.end
Example:
Device(config)# end
Step 9
Verifies your entries.show running-config
Example:
Device# show running-config
Step 10
(Optional) Saves your entries in the
configuration file.
copy running-config startup-config
Example:
Device# copy running-config
Step 11
startup-config
Monitoring and Maintaining IP Addressing
When the contents of a particular cache, table, or database have become or are suspected to be invalid, you
can remove all its contents by using the clear privileged EXEC commands. The Table lists the commands for
clearing contents.
Table 6: Commands to Clear Caches, Tables, and Databases
Clears the IP ARP cache and the fast-switching cache.clear arp-cache
Removes one or all entries from the hostname and the address
cache.
clear host {name | *}
Removes one or more routes from the IP routing table.
clear ip route {network [mask] | *}
You can display specific statistics, such as the contents of IP routing tables, caches, and databases; the
reachability of nodes; and the routing path that packets are taking through the network. The Table lists the
privileged EXEC commands for displaying IP statistics.
Routing Configuration Guide, Cisco IOS XE Everest 16.6.x (Catalyst 9500 Switches)
77
Configuring IP Unicast Routing
Monitoring and Maintaining IP Addressing
To Next Page
Loading...
Need help?
General
