Cisco Catalyst 9500 Series

Configuring VRF-Aware Services for ARP
For complete syntax and usage information for the commands, see the switch command reference for this
release and the Cisco IOS Switching Services Command Reference, Release 12.4.
Procedure
PurposeCommand or Action
Displays the ARP table in the specified
VRF.
show ip arp vrf vrf-name
Example:
Device# show ip arp vrf vpn1
Step 1
Configuring VRF-Aware Services for Ping
For complete syntax and usage information for the commands, see the switch command reference for this
release and the Cisco IOS Switching Services Command Reference, Release 12.4.
Procedure
PurposeCommand or Action
Displays the ARP table in the specified
VRF.
ping vrfvrf-nameip-host
Example:
Device# ping vrf vpn1 ip-host
Step 1
Configuring VRF-Aware Services for SNMP
For complete syntax and usage information for the commands, refer to the switch command reference for this
release and the Cisco IOS Switching Services Command Reference, Release 12.4.
Procedure
PurposeCommand or Action
Enters the global configuration mode.configure terminal
Example:
Device# configure terminal
Step 1
Routing Configuration Guide, Cisco IOS XE Everest 16.6.x (Catalyst 9500 Switches)
165
Configuring IP Unicast Routing
Configuring VRF-Aware Services