Cisco Catalyst 9500 Series User Manual

PurposeCommand or Action
Example:
Device(config-if)# ip vrf forwarding
vpn1
When ip vrf forwarding is enabled in the
Management Interface, the access point
does not join.
Note
Returns to privileged EXEC mode.end
Example:
Device(config)# end
Step 9
Verifies the configuration. Displays information
about the configured VRFs.
show ip vrf [brief | detail | interfaces]
[vrf-name]
Example:
Device# show ip vrf interfaces vpn1
Step 10
(Optional) Saves your entries in the configuration
file.
copy running-config startup-config
Example:
Device# copy running-config
Step 11
startup-config
Configuring VRF-Aware Services
These services are VRF-Aware:
•
ARP
•
Ping
•
Simple Network Management Protocol (SNMP)
•
Unicast Reverse Path Forwarding (uRPF)
•
Syslog
•
Traceroute
•
FTP and TFTP
The switch does not support VRF-aware services for Unicast Reverse Path Forwarding
(uRPF) or Network Time Protocol (NTP).
Note
Routing Configuration Guide, Cisco IOS XE Everest 16.6.x (Catalyst 9500 Switches)
164
Configuring IP Unicast Routing
Configuring VRF-Aware Services

Cisco Catalyst 9500 Series Specifications

General

Series	Catalyst 9500 Series
Category	Switch
Software	Cisco IOS XE
Operating Temperature	0°C to 45°C (32°F to 113°F)
Storage Temperature	-40°C to 70°C (-40°F to 158°F)
Fixed Uplink Modules	Varies by model
Stacking	Yes (StackWise Virtual)
Redundancy	Redundant power supplies and fans
Security	Advanced security features
PoE+	Available (varies by model)
Power Supply Options	AC and DC options (varies by model)
Relative Humidity	5% to 90% noncondensing
Dimensions (H x W x D)	Varies by model
Weight	Varies by model
Ports	Up to 48 ports (varies by model)