Cisco Catalyst 9500 Series User Manual

Feature History for Generic Routing Encapsulation Tunnel IP
Source and Destination VRF Membership
The following table provides release information about the feature or features described in this module. This
table lists only the software release that introduced support for a given feature in a given software release
train. Unless noted otherwise, subsequent releases of that software release train also support that feature.
Use Cisco Feature Navigator to find information about platform support and Cisco software image support.
To access Cisco Feature Navigator, go to www.cisco.com/go/cfn. An account on Cisco.com is not required.
Table 27: Feature History for Generic Routing Encapsulation Tunnel IP Source and Destination VRF Membership
Feature InformationReleasesFeature Name
The Generic Routing Encapsulation
Tunnel IP Source and Destination VRF
Membership feature allows you to
configure the source and destination of
a tunnel to belong to any virtual private
network (VPN) routing and forwarding
(VRF) table.
Cisco IOS 16.6.1Generic Routing Encapsulation
Tunnel IP Source and Destination
VRF Membership
Routing Configuration Guide, Cisco IOS XE Everest 16.6.x (Catalyst 9500 Switches)
209
Configuring Generic Routing Encapsulation(GRE) Tunnel IP Source and Destination VRF Membership
Feature History for Generic Routing Encapsulation Tunnel IP Source and Destination VRF Membership

Cisco Catalyst 9500 Series Specifications

General

Series	Catalyst 9500 Series
Category	Switch
Software	Cisco IOS XE
Operating Temperature	0°C to 45°C (32°F to 113°F)
Storage Temperature	-40°C to 70°C (-40°F to 158°F)
Fixed Uplink Modules	Varies by model
Stacking	Yes (StackWise Virtual)
Redundancy	Redundant power supplies and fans
Security	Advanced security features
PoE+	Available (varies by model)
Power Supply Options	AC and DC options (varies by model)
Relative Humidity	5% to 90% noncondensing
Dimensions (H x W x D)	Varies by model
Weight	Varies by model
Ports	Up to 48 ports (varies by model)