Cisco Catalyst 9500 Series User Manual

Procedure
PurposeCommand or Action
Enters the global configuration mode.configure terminal
Example:
Device# configure terminal
Step 1
Enters BGP router configuration mode.
router bgp autonomous-system
Example:
Device(config)# router bgp 100
Step 2
Configures a BGP confederation
identifier.
bgp confederation identifier autonomous-system
Example:
Device(config)# bgp confederation
identifier 50007
Step 3
Specifies the autonomous systems that
belong to the confederation and that will
be treated as special EBGP peers.
bgp confederation peers autonomous-system
[autonomous-system ...]
Example:
Device(config)# bgp confederation peers
51000 51001 51002
Step 4
Returns to privileged EXEC mode.end
Example:
Device(config)# end
Step 5
Verifies the configuration.show ip bgp neighbor
Example:
Device# show ip bgp neighbor
Step 6
Verifies the configuration.show ip bgp network
Example:
Device# show ip bgp network
Step 7
(Optional) Saves your entries in the
configuration file.
copy running-config startup-config
Example:
Device# copy running-config startup-config
Step 8
Routing Configuration Guide, Cisco IOS XE Everest 16.6.x (Catalyst 9500 Switches)
142
Configuring IP Unicast Routing
Configuring Routing Domain Confederations

Cisco Catalyst 9500 Series Specifications

General

Series	Catalyst 9500 Series
Category	Switch
Software	Cisco IOS XE
Operating Temperature	0°C to 45°C (32°F to 113°F)
Storage Temperature	-40°C to 70°C (-40°F to 158°F)
Fixed Uplink Modules	Varies by model
Stacking	Yes (StackWise Virtual)
Redundancy	Redundant power supplies and fans
Security	Advanced security features
PoE+	Available (varies by model)
Power Supply Options	AC and DC options (varies by model)
Relative Humidity	5% to 90% noncondensing
Dimensions (H x W x D)	Varies by model
Weight	Varies by model
Ports	Up to 48 ports (varies by model)