Citrix SD-WAN Series - Page 12

Citrix SD-WAN Platforms
The following components are visible on the back panel of the SD-WAN WANOP 1000 appliance:
• 600 GB removable solid-state drive, which stores the appliance’s soware and user data.
• USB port (reserved for a future release).
• Single power supply, rated at 300 watts, 100-240 volts.
Power on appliance aer a graceful shutdown
To power on the appliance aer a graceful shut down:
1. Connect a Serial console cable to the rear of the appliance and to the serial port on a manage-
ment laptop.
2. On the management laptop, restart a putty session using the following configuration settings:
• Serial line: COM1
• Speed: 9600
3. Power on the appliance and as it is booting, press the following key in the Putty session to enter
the BIOS configuration screen. Keypress: DEL
4. When in the BIOS, navigate to,
• Advanced Tab > Select
• Boot Feature > Enter
© 1999-2021 Citrix Systems, Inc. All rights reserved. 12