Citrix SD-WAN Series - Summary of Hardware Specifications

To Next Page

To Previous Page

Citrix SD-WAN Platforms

– Run: disable

• To show the status:

– Log in appliance CLI via ssh admin@(IP address)

– Run: sfp_access

– Run: status

• Ensure that you disable the management access once configuration is done.

• When the appliance is rebooted, the management access is disabled automatically.

• When virtual service is restarted, the management access remains configured until enable

or disable operation is done.

• When the appliance is disabled, the management access to the SFPs is lost.

• When the appliance is re-enabled, the management access is regained.

3. To configure E1 or T1 type for SFP transceiver:

• The client machine must be in the same IP subnet as the appliance management subnet.

• The client machine must have a route to the subnet of SFP transceiver IP address,

192.168.205.0/24, with the appliance management IP as the gateway.

• Open a browser and visit SFP transceiver management

• Default user name: su

• Default password: 1234

• To configure Interface Type (E1 or T1), navigate to Configuration > Physical Ports and

choose E1 or T1 from the drop down menu, and click Save button.

Summary of hardware specifications

January 24, 2021

Specifications 210-SE and 210-SE LTE

Regulatory Model Number NS-SDW-210, NS-SDW-210-LTE-R1,

NS-SDW-210-LTE-R2

Processors Intel C3338

Memory 4 GB DDR4 PC4-2400 SODIMM

Number of Power Adapters 1

AC Power Supply (adapter) Voltage, Frequency

and Current

115–230 V 50–60 Hz 1.5A